1. Industries
  2. Infrastructure
  3. Water management
  4. Walls and floors

Further sealing solutions for your walls and floors

All cables and pipes passing through the wall, roof or floor of the building or shelter can be sealed with the Roxtec sealing system. The seals are air-tight and contribute to cost-savings as they do not let air escape from cooled areas. Protect high cable density equipment with our certified cable entries that are openable to simplify maintenance and sudden changes.

Why use Roxtec?

  • Watertight
  • Firestop
  • Gas-tight
  • Air-tight
  • Protection against pressure
  • Blast load protection
  • Pest and rodent barrier
  • EMI protection

Superior simplicity

  • Easy and safe installation
  • Flexibility for cables and pipes of different sizes
  • Optimized air management and reduced energy costs
  • Climate change safety
  • Built-in spare capacity for future cables and pipes
  • EMC solutions for bonding, grounding and electrical safety
  • Free, online transit design tool available
Sealing solution options
Roxtec G transit

Roxtec G transit

fire rated.svg
watertight.svg
gas-tight.svg

Transit with flange, for welding.

For welding

Fire

  • A-CLASS according to IMO 2010 FTP Code
  • E/EI rating according to EN 13501
  • F/T rating according to UL 1479

Tightness

  • Gas: 2.5 bar (catastrophic)
  • Water: 4 bar (catastrophic)
Roxtec GH transit

Roxtec GH transit

fire rated.svg
ip-ul nema.svg
gas-tight.svg

Transit with flange, for casting or bolting.

For casting or bolting on to even structures

Fire

  • E/EI rating according to EN 13501
  • E/EI rating according to EN 45545 E60
  • F/T rating according to UL 1479

Tightness

  • Gas: 0.1 bar (catastrophic)
  • IP 66/67
  • IP 68
Roxtec GH FL100 transit

Roxtec GH FL100 transit

fire rated.svg
ip-ul nema.svg
gas-tight.svg

Transit with wide flange, for bolting onto uneven structures.

For bolting to concrete/bricks

Fire

  • E/EI rating according to EN 13501
  • F/T rating according to UL 1479

Tightness

  • Gas: 0.1 bar (catastrophic)
  • IP 66/67
Roxtec GKO transit

Roxtec GKO transit

fire rated.svg
ip-ul nema.svg

Transit with a frame to bolt into different combinations.

For retrofit installation when bolting

Fire

  • E/EI rating according to EN 13501
  • F/T rating according to UL 1479

Tightness

  • IP 66/67
  • IP 68
Roxtec RS seal

Roxtec RS seal

fire rated.svg
watertight.svg
gas-tight.svg

Penetration seal for a single cable or pipe.

For installation in existing sleeves or core drilled holes

Fire

  • A-CLASS according to IMO 2010 FTP Code
  • E/EI rating according to EN 13501
  • E/EI rating according to EN 45545 E30
  • F/T rating according to UL 1479
  • H-CLASS according to IMO 2010 FTP Code + HC fire load curve
  • Jet fire according to ISO 22899-1 and OTI 95634

Tightness

  • Gas: 2.67 bar (catastrophic)
  • Water: 4 bar (catastrophic)
Roxtec R transit

Roxtec R transit

fire rated.svg
watertight.svg
gas-tight.svg

Round transit for sealing around multiple cables and pipes in a limited area.

For installation in existing sleeves

Fire

  • A-CLASS according to IMO 2010 FTP Code
  • E/EI rating according to EN 13501
  • E/EI rating according to EN 45545 E30
  • F/T rating according to UL 1479
  • H-CLASS according to IMO 2010 FTP Code + HC fire load curve

Tightness

  • Gas: 2.5 bar (catastrophic)
  • Water: 4 bar (catastrophic)